Tile flooring, in its many forms, has been around for millennia. We have evidence that the ancient Romans and Egyptians used stone tiles for their floors. The ancient Romans liked marble a lot and also may have used that gorgeous stone as well. The ancient Egyptians could have used ceramic or clay tiles, plus natural stone paver-type tiles. Today, there is a huge variety of tile flooring that a homeowner can purchase. The choice is so varied that just narrowing it down might take a little research and design work.
Tile Flooring by Mohawk
Most any store that carries home improvement products will have some assortment of tile flooring if you want to get your feet wet and try a small room. An in-home utility room would be a wonderful first project as it can be left unfinished for as long as you want, while you work out a few kinks. For floors that may get a lot of wear and tear, or dampness (such as that utility room or perhaps a laundry area or kitchen), ceramic tiles are perfect for a first-timer. Because they are manufactured in a factory, they are of a uniform size and thickness. This makes laying them on the floor much easier than, say, natural stone tiles. The latter can be slightly off on measurements and this type of travertine, or slate, or other natural stone tile flooring will turn out uneven if laid in the normal grid pattern that ceramic tiles are mostly laid in. Natural stone tiles have to be staggered like a brick wall when laid, so that any unevenness is hidden. Ceramic tiles are usually cheaper than natural stones tiles so if you break a few, it doesn’t make much difference.
Tile Flooring by Daltile
If you really get into laying some tile flooring, a wider variety of materials and colors and patterns can be ordered online or at a dealer or larger big box store. If you’d like a very simple first tile flooring project, vinyl tiles may be used. You just peel off the backing and stick them to your floor, which has to be smooth and bump free. Lay them out in the pattern you want first, then when you are happy, go for it. Measure out the center point of your floor and go from there. They can be cut with heavy duty scissors. Tile flooring may be made from natural stones like granite and marble and travertine and slate, or ceramic in many forms, or even cork or real hardwood or vinyl, plus many other exotic substances. There are even carpet tiles, which are just larger squares of carpet that may be laid in a pattern or one color, and they are not glued so that if one gets damaged, you just whip it out of there and replace it.
Hard tiles as they are being laid need spacers between each side so that an even space is left for grout, when the mortar is dry. Grout should be sealed so that it is not affected by most stains and moisture. Ceramic tiles can be deep cleaned, as well as the grout at a later date, then resealed, if they become grimy with age. The choices in tile flooring are virtually limitless. Start simple, then move on to a more complicated project. Seeing the new floor that you laid down yourself, every day, will give you a sense of satisfaction that is hard to beat.
Source for article : WikiFlooring.org
Popularity: 2% [?]
